cooking hamburgers with infrared gas grills
Cooking with infrared gas grills can be tricky the first time. Although the technology was invented at TEC decades ago, many of my clients are buying their first infrared gas grill. Often we will build an outdoor kitchen as part of the backyard design renovation and a homeowner will ask me what type of book to buy to learn how to cook with their new infrared gas grill. Unfortunately there is not a book that I know of that provided step by step cooking instructions for using a gas grill with infrared technology.
The important thing to remember with infrared grilling is the heat. Yes, of course you know it is hot but a well-built stone oven can also be hot. If you could get your kitchen oven up to 1500 degrees, would your steaks cook faster and taste better? Of course they would. Infrared is different though. One of the important features with infrared grills is keeping the hood open when you cook. This is because the gas creates pressure in the burner so the fire is much hotter than simply running through a pipe burner. The infrared burner gives off tremendous heat without closing the hood to allow heat to conduct through the air trapped inside the hood.
The result of this burner is an enormous amount of heat rises directly off the infrared burner. The heat is radiant heat and is directional. This means the heat moves mostly straight up. The cooking grates actually create a serious impediment to the heat because the heat is moving straight up, not conducting in the air. Some of the heat will conduct through air and you can feel it while you are cooking but the direct infrared heat that instantly sears the outside of your food is too hot for that.
Notice the image above of the hamburger. This burger was frozen solid when it was placed on the gas grill cooking surface. The space between the cooking grates shows a different reaction to the heat than the part of the burger protected by the cooking surface. This is after :30 seconds The same thing will happen regardless of what is on the infrared grill. What I do is give the food 30 – 45 seconds and then turn it. I do not turn it over but shift the position by turning it a quarter of a circle, or ninety degrees. This allows the section of the burger (steak, swordfish, etc) that is not getting the direct heat to get the direct radiant heat from the infrared burner.
cooking with an infrared gas grill
The timing changes because of heat conducted in the air. For instance, while the strips in between the cooking grates are getting blasted with the direct heat from the infrared grill, the section of the food covered by the grates is still getting residual heat transferred by atmosphere and through the food itself. At fifteen seconds, the burger will look striped with strips of cooked and uncooked areas affected by the cooking grates. At :30 seconds the phenomena is less evident because heat is conducted through the air, through the food and conducted through the stainless grates. The areas covered by the cooking grate become somewhat cooked. With 1400 degrees blasting the area right next to it, the covered areas of food should still be getting 500 degrees of indirect residual heat.
Get a perfect sear on an infrared gas grill by quarter-turning the meat midway through the sear.
Depending on how long you will cook the food to get the desired consistency and flavor, do the same thing on the other side of the food. I generally give one minute and thirty seconds per side to make sure the food is completely seared. This is difficult in the pictured example because hamburgers are made of compressed ground beef. The surface is not really flat and it is difficult to completely sear. Other foods like steaks and fish filets are easier to cook and obtain a perfect sear. I eat everything medium well so once the three minutes of searing is complete I lower the temperature and close the hood. This allows indirect heat to surround the food conducted in the trapped air under the hood and cooks the inside of the food.
searing your food with an infrared grill is sealing moisture inside the meat
Cooking with infrared is more similar to using a frying pan than it is to using a barbeque because true grilling is done at the cooking surface. Many grills use porcelain briquettes, lava rocks and rods to conduct and radiate heat just below the grids. The invention of infrared technology and its use in gas grills allows a shorter warm-up period and more consistency while cooking. I just tell clients to do what you normally do but do it faster. The rest comes with practice.
