BBQ Grill Replacement Igniter Fits Charbroil Models.

Although there are many kinds of replacement modules that generate the electricity to the electrodes inside the barbecue many of the Charbroil models are better served by using this replacement. Look at the cut-out hole in the control panel to see what will fit best. This style of module can be used in a round hole in the control panel and can be used in a control panel notched like the one below. The round mounting nut will support the spark generator in any control panel hole less than three-quarters of an inch diameter.

Charbroil Parts Charbroil Cooking Grates Charbroil Shields Charbroil Burners
Item Description Price Illustration
IGEB-4

Universal 4 Spark gas bbq grill ignition module. AAA battery screws under button and nut hold module to control panel with 4 attachments for using up to 4 ignitor electrodes together. Less than 4 can also be used by grounding unused electrode attachments.

$28.00

Free Shipping USA!!
universal spark generator bbq grill ignition module
stainless vaporizer radiant for capital bbq

Charbroil Ignition Module.

From the outside of the control panel we only see the button to oress and the square frame around the button. The back side of the button is the module and the igniter electrodes will all plug into the outlets on the back side of the module which is inside the control panel.

top of capital radiant

This is the control panel once the ignition module has been removed from the control panel. Instead of a round hole in the panel the hole is only about the diameter of a AAA battery but there are notches for where the threads pass through. The entire round section that passes through the control panel is not threaded like many battery holders. The Charbroil module only has threads to attach the lock nut and button on these two spots.

The replacement module showed here is a different design from the original but the threading and the notches match the replacement ignition perfectly.

If the burner is filthy Test the electrode by holding a screwdriver close to the electrode so the spark has something clean to arc against.

ignitor being tested
Item Description Price Illustration
IGEB-4

Universal 4 Spark gas bbq grill ignition module. AAA battery screws under button and nut hold module to control panel with 4 attachments for using up to 4 ignitor electrodes together. Less than 4 can also be used by grounding unused electrode attachments.

$28.00

Free Shipping USA!!
universal spark generator bbq grill ignition module
424IGB

Replacement Ignition Electrode. Front bracket fits ledge inside Charbroil BBQ and mounting bolt tightens the electrode from within the control panel (see image below).

$28.00

Free Shipping USA!!
replacement electrode with mounting bracket
battery cavity in spark generator

Instead of a round hole the notched hole fits this new module perfectly.

Ignition button

Once the module is installed only the button is visible and the module is mounted tightly to the control panel.

Capital Grill Parts
module with mounting nut tightened

New Ignition Module installed with locking nut installed to hold the module to the control panel so the battery can be changed and the battery cover button mounted on top. The diameter of the nut allows this same module to be used on control panels with a round hole in the control panel since the plastic nut can be tightened to support the module in either type of control panel ignition hole.


888.346.6930
grill repair is secure