Ignition Electrode For Dynasty Gas BBQ Grills.

The original company manufacturing Dynasty is gone and all their grill repair parts are also gone. The Jade Corp manufactured Dynasty as well as Jenn Air and many other high-end brands which were all sold off when the company crumbled. Although there were Dynasty barbecues sold with the Jenn Air name and Jenn Air barbecues sold that had nothing to do with Jade or Dynasty we have had to explore the grills to find parts for repairs. This ignition electrode and collector box is the replacement igniter we have been using on the original Dynasty models which were the grills with the Large and Heavy Cast Iron H shaped Burners.

Dynasty Burner Detail Dynasty briquette Tray Info All Dynasty Parts Contact Us
Item Description Price Illustration
49561

Stainless Steel collector box and Ignition electrode assembly. This ignitor does not have a wire attached and comes mounted with a bolt inside a long protective collector box with Two mounting holes and hardware.

$16.

Free Shipping Cont'l USA!!
dynasty bbq grill replacement electrode and collector box igniters for grill repair
dirty used electrode igniter in dynasty bbq grill

Original Dynasty Igniter

By the time our Dynasty BBQ grill ignition looks like this we are lighting the H burners with a pocket lighter. Electrodes are inside the stainless steel collector box to collect fuel for ignition but also to protect the electrode from dripping sauces and grease.

Once oxidation - rust - sets in from grease build up the assembly is often to weak to be cleaned and must be replaced.

New igniters installed in a Dynasty barbecue grill when we also installed new replacement H burners. The electrode will spark at the far tip of the end of the collector box and we can slightly bend the tip of the electrode so set the gap against the side or the end of the collector box as needed. Sometimes it is a good idea to bend the electrode slightly back and sideways so dripping grease cannot splash over the sparking area but as the ports get clogged - not cleaned! - this slows down ignition times.

electrodes installed ignite dynasty burner
dirty used electrode igniter in dynasty bbq grill

Ignitor Assembly.

The electrode and collector box ship with hardware for installing the ignitor in the Dynasty grill. The hardware includes a small nut and bolt with a washer and a lock-washer for the nut side. The lock-washer is nice because temperature variations can cause hardware to loosen and the lock-washers prevent this from happening.

49561

Stainless Steel collector box and Ignition electrode assembly. This ignitor does not have a wire attached and comes mounted with a bolt inside a long protective collector box with Two mounting holes and hardware.

$16.

Free Shipping Cont'l USA!!
dynasty bbq grill replacement electrode and collector box igniters for grill repair
83408

Electrode wire for piezo spark generator modules. 20 inches long with One Female spade connector and One Round Female Connector for a simple fit to any of the male spades on these gas bbq grill ignition electrodes that needs to attach to a rotary or piezo button module.

$5.


Free Shipping USA!!
bbq grill repair parts electrode wire for igniter starter
83508

20" wire with female spade connectors. Made to connect igniter electrodes and spark generator modules in all types of barbecue grills and any igniton system connection.

$5.


Free Shipping USA!!
twenty inch electrode wire with female spade connectors
83618

47 ignition electrode wire with female spade and square plastic connectors used with battery powered spark generators to connect igniter electrodes and modules for All barbecue grill ignition connections.

Usually a rotisserie connection because of the length. However, if More length is needed and you select wires to be connected together, just let us know and we'll send connectors with the wires.

$6.


Free Shipping USA!!
long electrode wire for grill parts repair ignition
83628

Ground wire with a female spade and a round connector for use with spark generator connection to ignition electrode.

Add or replace ignitor module ground in ignition systems. Any ignition module spark generator with an extra outlet connection Must Be Grounded.

$6.


Free Shipping USA!!
bbq grill parts ignition electrode ground wire
IGEB-3 Universal 3 Spark gas bbq grill ignition module. AAA battery screws under button and nut hold module to control panel with 3 attachments for using up to 4 ignitor electrodes together. Less than 3 can also be used by grounding unused electrode attachments. $28.00

Free Shipping USA!!
universal spark generator 3 prong bbq grill ignition module
IGEB-4

Universal 4 Spark gas bbq grill ignition module. AAA battery screws under button and nut hold module to control panel with 4 attachments for using up to 4 ignitor electrodes together. Less than 4 can also be used by grounding unused electrode attachments.

$28.00

Free Shipping USA!!
universal spark generator bbq grill ignition module
Q8315

Replacement electric all-in-one spark generater module. This type of module is the spark generator, the button, the battery holder and mounting bracket all in one product. The nut under the button holds the spark generator to the front control panel so only the button sticks through the barbecue grills panel. The button unscrews to be able to remove and replace the AAA battery without removing the entire module.

Module Details and Testing
$30.



Free Shipping USA!
spark generater all in one universal module
Module Details and Testing
Dynasty Burner Detail Dynasty briquette Tray Info All Dynasty Parts Contact Us
ignitor electrode inside dynasty bbq grill

Check your measurements

This picture shows the New ignitor electrodes installed with a brand new set of cast iron H shapes grill burners. Note the electrode is installed to mount on the right side of the center venturi tube but still inside the form of the H burner. This position combined with the opening of the collector box will cause the burner to ignite very quickly.

Centered on the page here we also have close-up pictures of this replacement electrode and collector box with a measuring tape so we can match the size of the replacement in the grill.

installing grill igniter

This picture was taken from inside the Dynasty control panel where we can see the line up of the holes drilled in the firewall by the manufacturer of the Dynasty gas grill. These Three holes allow the mounting bolts and the electrode to pass through the fire wall so the wires are protected inside the control panel and the sparking electride lines up with the cast iron burner ports.

Ignition Electrode And Collector Box Dimensions Provided So We Can Check Dynasty Grill Installation With Our Own Measurements In Addition To Seeing The Igniter Installed In Above Images Of Dyansty Gas Grill Repair Projects.

length measure dynasty ignitor
length measure dynasty ignitor
888.346.6930
grill repair is secure