Electrode Replacement for Gas BBQ Grill Ignition -- All Grill Igniter Parts

ignitor collector box with electrode. The electrode igniter fits Turbo barbecue grills and other BBQ Galore models. The wide collector box acts like a cross-over tube lighting 2 burners.

Click here for additional information about this electrode.

ignitor collector box with electrode often installed on Kenmore barbecues, Charbroil and various other barbecue grills. We have also used these on the AOG grill models. The long threaded sleeve allows the electrode tip and collector box to be shorter or longer for lots of BBQ model igniter repair installations.

See Picture Below.

ceramic electrode, heat sleeve and wire fits Perfect Flame and various other gas barbecue grills. In addition to repairing the barbecue ignition with this electrode we also use this electrode to replace the igniter on DCS rotisserie burners and several other model grill rotisserie burners.
Electrode Instructions

Replacement ceramic electrode, mounting bracket and male connector for gas grill universal ignitor repair.

Igniter Detail

ignitor and collector box. Mounts perpendicular through casting with threaded rod and locking nuts. Includes male spade connector. No wire.
Ignitor electrode fits Broilmaster, MHP, PGS grills and others.

Stainless steel replacement collector box for Profire Professional gas barbecue grill repair. This collector box is used with the electrode above which fits both the Profire Professional models and the Profire Performance model gas grills.

Profire Performance model collector box. The Profire Performance gas grill models use the same igniter electrode as the Professional models (PF.80.3828 on this page) but this collector box that installs with the electrode is different between the 2 models.
Performance Igniter Detail

ceramic electrode fits gas grill ignitors including Charbroil and Kenmore. We also use this electrode to replace the rotisserie electrode on DCS gas BBQ grills and some others.
Electrode Instructions, Details and Specifications

Replace ment electrode for gas grill repair. This electrode was designed to fit a Coleman barbecue grill We also use this electrode for OCI Elite model gas grills. The wires makes the length 47 inches from the bracket to the wire plug.

Ignition Details

universal ignitor bracket with collector box, electrode, insulated wire, and female connector compatible with most piezos. Fits all H burners, both cast iron and stainless steel. Mounts to burner using venturi screws. Slot allows adjustment of electrode position.

electrode details

Replacement ignitor electrode with collector box and wire for DCS models of the last 12 years.

Electrode Details

Electrode replacement kit for older DCS side burner. The single electrode lights both burners on the DCS double sideburner.

igniter details

Replacement ignitor electrode and wire reverse of electrode below for Steelman burner 162R1 right side. From bracket to end of wire is seventeen inches. Insulated sleeve protects electrode from barbecue heat that can move into the control panel.

Replacement electrode and wire is reverse direction of above electrode for left and right side burner ignition in Steelman burner 162L1

Replacement ceramic electrode ignitor used to repair BBQ grill models by Amana, Surefire, Tuscany and other barbecue grills. With a simple mounting bracket and long steel post an electriode like this can be used to repair most barbecues.

Igniter Electrode 106730

Replacement BBQ grill ignition electrode and electrode wire originally created for Coleman barbecue repairs. This electrode is attached to an electrode wire approximately 40 inches long from the tip of the female plug to the mounting bracket. The whole item is 45 inches long because the electrode is oversized for easy adapting and heat protection.
Electrode 104423 details

Replacement ignitor electrode and wire designed to fit Brinkmann BBQ grill models. Total length of electrode with wire is 13 inches and eleven inches from installation bracket to electrode wire plug.

Electrode 102415 Details

8090

Viking gas barbeque grill electrode replacement used to repair Viking BBQ model igniters. In the ignition assembly, the electrode is like the spark plug. The electrode mounts near the U burner and arcs to light the gas as it leaves the barbecue grill burner.

.63 inch from the mounting bracket to the end of the porcelain housing.

8091

Longer replacement electrode for Viking gas barbecue grill models that use item PB040288 gas grill igniter. Item 8091 replaces this Viking grill parts item to ignite straight pipe burner, called smoker burner.

1.35 inch from mounting bracket to end of porcelain housing.

47” ignition electrode wire with female spade and square plastic connectors, used with battery powered spark generators to connect igniter electrodes and modules for Amana, Brinkmann, Centro, Charbroil, Chargriller, Charmglow, Coleman, DCS, Grand Cafe, Grill Chef, Grill King, Kenmore, Kmart, Master Forge, Nexgrill, OCI, Outdoor Gourmet, Patio Range, Perfect Flame, Sams, Surefire, Turbo and lots of others.

Lynx glo-plug ignition electrode with shielded tip. Individual glow plug electrode for Lynx gas grills manufactured after 2007 and before the hot-surface electrodes were used. This glow plug has a small stainless protective shield on the tip where the ignition coil glows orange when lighting the barbecue grill.

Lynx replacement electrode for Lynx barbecue grill repair models made in 2006. Sixteen Inch Wire.In 2007 Lynx started using the glow-plugs. This 2 prong electrode arcs to itself and is too small to get often covered in grease. This is a very reliable gas barbeque grill igniter design.

Lynx replacement electrode for Lynx barbecue grill repair models made in 2006. Twenty Six Inch Electrode Wire. In 2007 Lynx started using the glow-plugs. This 2 prong electrode arcs to itself and is too small to get often covered in grease. This is a very reliable gas barbeque grill igniter design.

82357

TEC infrared gas grill electrode

Infrared gas grill electrode for older infrared gas grills and newer infrared gas grills. The two posts allow the igniter to arc between the two points and ignite gas emitting from the infrared gas grill burner.

82358

TEC new gas grill electrode

New TEC gas grills use a rectangular stainless steel burner with has angled shields that magnify heat for infrared temperatures without the original pressurized ceramic tile burners. This electrode spark arcs against the stainless steel material of the burner.

Alfresco single post gas barbeque grill ignition electrode for infrared and blue-flame convection burner.
210-0189.

Alfresco Electrode Detail

Alfresco gas barbecue grill electrode for Alfresco smoker burner igniter. Several Alfresco gas grill models have a smoker. The electrode is slightly smaller than the convection bbq burnner electrode. This electrode can also be used for Vintage barbecue grills.