Home. Grill Parts By Brand. BBQ Parts By Size. Universal Grill Parts Repair Instructions. Contact Us.

Solaire 27G Replacement Gas Grill Burner.

This center-feed U burner is designed for Solaire 27G models. Solaire infrared and Infra-Vection grills have had three different twenty-seven inch grill models. The original 27 was called the Petite and had 3 burners across Twenty-Seven Inches width! Any of the three burners could be infrared or convection. The 27G has 2 burners and does not ever come with an infrared back burner. The 27G is also only about 16 inches deep. The 27GXL is called the Deluxe and is 21 inches deep. The GXL also has an optional infrared back burner for a rotisserie. Make sure you have the right grill for the replacement grill burner.

Although Solaire does not support this action we have used the 27G burner in grills not manufactured by Rasmussen. Several off brand barbecues had U burners in them that are 12.75 inches long like this burner. Although the Solaire center-feed tube is level with the U shape of the burner -- the middle tube does not drop lower than the rest of the burner -- we have not had problems installing this burner into other grill models that do not have replacement burners available. There is no warranty for this application.

Solaire Parts Solaire Portable Grill Parts Solaire 30, 42, 56 Repair Parts Solaire 27 Repair Parts
SOL-6209R

Replacement U shape convection burner. Solaire grill replacement burner for 27G model. Stainless steel blue-flame burner infra-vection and all convection barbecuing is 304 stainless steel and has a cross-over tube for ignition and adjustable air vent.

Solaire burner installation video direction
$141.
stainless steel blue flame convectional burner to replace infrared burner 27G model gas grill repair
Solaire burner install instructions
extra port hole for grill ignitor

This is a close up of the Solaire blue flame burner showing the base of the burner. The design of the burner allows for a cross-over tube to transfer burning flames across the burner to accellerate gas ignition as the gas fills the burner. Otherwise flames will slowly light up and around the U.

The extra port hole in the top of the burner is positioned exactly where the Solaire ignition electrode mounts above the burner so the gas emitting from this port encounters the sparking electrode and ignites immediately.

This detail of the Solaire burner for the 27G model grill shows the mounting bracket used on this burner which is different from the U burners in the 30, 42 and 56 inch grill models.

Inside the Solaire infrared and InfraVection grill firebox is a support beam designed for the end of the burner to snap in place. The back bracket keeps the burner immobile in the grill and holds the burner level so gas flows smooth.

Although the infrared barbecue grills use Propane gas and Natural gas it is common for gas to behave like a liquid so it needs to flow level in the burner tubes. Like the burner the support bracket and the support bar in the grill is 304 stainless steel.

27g burner support bracket
SOL-6209R

Replacement U shape convection burner. Solaire grill replacement burner for 27G model. Stainless steel blue-flame burner infra-vection and all convection barbecuing is 304 stainless steel and has a cross-over tube for ignition and adjustable air vent.

Solaire burner install instructions
$141.
stainless steel blue flame convectional burner to replace infrared burner 27G model gas grill repair
Solaire burner install instructions
27g burner support bracket

Solaire U burner for AGBQ-27G LP and NG grill models. This picture of the stainless steel burner is upside down so we can see the bottom side of this burner.

solaire 27g all blue flame bbq grill

The Solaire 27G infrared gas grill shown here has one infrared burner and one blue-flame U shaped burner. The burners can be easily changed allowing the homeowner to switch burners very easily to allow Solaire owners a tremendous range of cooking styles and temperatures.

Solaire burner install instructions
inside of solaire grill

The inside of the Solaire grill firebox shows the double prong electrodes which became popular with infrared burners. When we install the U burner shown here we bend the electrodes down at a 90 degree angle so the gap where the spark arcs is right above the igniter port in the top of the burner.



888.346.6930

grill repair is secure