Replacement Parts For Solaire 27g and 27 GXL Infrared Gas Grill Repair

Solaire infrared gas bbq grill burner and stainless steel mesh screen for AGBQ-27G model.

AGBQ-27G -- Infrared Burner.

Solaire infrared replacement burner and stainless mesh screen for smaller three burner 27 inch gas grill, IRBQ27G (Petite)

AGBQ-27-Petite -- Infrared Burner.

Solaire infrared burner and stainless mesh screen for 27GXL infrared and infravection gas grill model. Solaire infrared GXL is a 27 inch model that is deeper than the 27G and the 27 Petitie models. The replacement infrared burner is also larger than those models.

27GXL -- Infrared Burner.

Replacement gas BBQ grill cooking grate for Solaire 27 inch infrared gas grills with "V" cooking grates - Solaire infrared grill models:

AGBQ-27G and IRBQ27G (Petite) -- Grates.

Replacement cooking grate for deluxe Solaire GXL infrared gas grill models. The GXL is available with or without infrared burners and with or with out a back rotisserie burner. The GXL model uses 2 of these grilling grates.

27GXL - Grates.

Solaire replacement mesh screen only for infrared grill burner in three burner AGBQ-27G. This item replaces the stainless steel mesh screen that covers the infrared burner

Stainless steel replacement mesh screen to cover the infrared burner in Solaire 27 Petite model gas grills. The Petite models have been discontinued for many years but were a 27 inch Solaire infrared gas grill with three distinct burners in the grill.

Solaire 27 GXL deluxe model barbecue grill replacement mesh screen. This is the stainless steel mesh screen that installs to protect the infrared burner on top of the infrared grill burner.

Replacement U shape convection burner. Solaire grill replacement burner for 27G model. Stainless steel blue-flame burner infra-vection and all convection barbecuing is 304 stainless steel and has a cross-over tube for ignition and adjustable air vent.

Replacement stainless steel heat shield flavorizer for 27G. Stainless vaporizer tray installs above blue-flame U burnet to deflect falling marinades and grease and diffuse rising heat for convection barbecuing.

Solaire AGBQ-27G convection burner and heat shield vaporizer. This is the conversion kit that includes the burner and the vaporizer shield that replace the infrared burner in ther 27G model

Regulator, convertible - for all grills. The Solaire regulator has half-inch pipe thread fittings and is designed to be used for propane and for natural gas. The back of the regulator has a removable cap that puts tension on the spring so the cap facing up is set for LP and the cap flipped over is for NG. The cap is marked LP on one side and NG and the other side so we know which way to replace it.

304 stainless steel Solaire infrared gas grill scraper for concave, vaporizing cooking grates with V channel. The scraper is designed to perfectly scrape the V channel grids clean to make the stainless steel last longer.

Scraper Details

Solaire replacement safety valve for rear infrared rotisserie burner.
The safety valve allows gas flow using heat through the thermocouple so gas will stop flowing if the flame goes out. The safety valve ships with a replacement thermocouple.

Rasmussen Solaire thermocouple replacement for infrared back burner gas grill repair.

If the rotisserie is constantly turning itself off either the thermocouple or the safety valve needs to be replaced to repair the millivolt safety.

Battery holder button switch attached to barbecue grill vontrol panel as ignition burner. This button wires connect to the 4 spark or the 2 sprak modules below and acts as a momentary switch interrupter so the electrodes spark repeatedly when this ignitor button is depressed.

4 Spark Module #6524 (old style - New Style module uses 9 volt battery). Module uses push button battery holder that attached to this module and the module attaches to the electrodes mounted abve the burners.

SS Hood Spacers to fit between Solaire infrared gas grill hood to allow hood to open and close without rubbing on bgas grill shield. This item is a pack of 2 spacers.

15" Igniter Wire Electrode. 20 Gauge 191 UL HV electrode wire is a vast improvement over previous electrode wires for pulling high voltage.

38" Igniter Wire Electrode with 20 gauge 191 UL Electrode wire.

72" Igniter Wire Electrode. Long heavy gauge electrode wire for installing all the way back to the rotisserie in Solaire infrared grills.

9 Volt Quickliter 2 Spark Module
This is the newer module design. The 9 volt battery screws up into the module from below the control panel. Two spades allow for 2 igniter electrodes to be controlled from this module. The ignition button is mounted in the control panel.

9 Volt Quickliter 4 Spark Module
Same as above with 9 volt battery but this module has 4 spades to connect 4 or less electrodes. This is used on the 27 GXL models with a rotisserie and on the 30, 42 and 54 inch barbecue grill models.

Push button replacement for Solaire 9 volt ignition system. The 9 volt module is wired to this button mounted in the control panel as a momentary switch that starts the ignition sparking. Newer model Solaire infrared gas grills use the nine volt module with this button switch.