Weber BBQ Grill Ignition Replacement Kit For Genesis Models.

The new Weber Spirit and Genesis model barbecues have front-to-back burners and front mounted control valves for the first time in many decades of Weber fabrication. For the first time the barbecues do not need a separate ground wire and do not rely on a cross over tube to ignite the burners because every control has its own ignition electrode. This replacement kit is designed for use with the Genesis 330 models since 2010 but can also be used on various 300 series grills. The all in one module has four outlets to attach four electrodes and the hardware, wire clips connection wires are all included in this one assembly.

Weber Parts Weber Flavorizers Weber Cooking Grates Weber Burners
87629

Ignition assembly kit for Genesis 300 series model barbecues. Ignitor kit has module with button and 4 electrodes with color coded wires for easy installation. Genesis models from 2010 using up to four front-mounted controls use this igniter kit.


$33.



Free Shipping USA!
weber ignition kit spirit genesis bbq
front mounted control valve

This replacement Weber igniter assembly has all the individual grill parts that make up the ignitor assembly for the Genesis 330 models since 2011.

Early Genesis barbecue models had the control knobs on the side of the grill and the ignition was also on the right side with the knobs. Since 2010 the Genesis and the Summit model grills have the controls in front of the firebox and the burners install from front to back. This new design also moved Weber igniters away from the old Cross-Over design that only used one ignition electrode. The new Genesis models have front to back burners and the 330 has an extra burner for a higher-heat searing zone so each burner has its own ignition electrode.

install weber electrode ignition

These New Electrodes have the same ceramic housing as any electrode in any grill but Weber has extended the ceramic into a protective hood instead of using stainless steel around the electrode.

weber electrode ignition
installation instructions for weber igniter installed weber ignitor electrode on burner

This ignition kit comes with all 4 electrodes although it is not necessary to use all four because one or more connectors can be grounded or jumped in order to use this kit with the Genesis 310 or 320 models.

87629

Ignition assembly kit for Genesis 300 series model barbecues. Ignitor kit has module with button and 4 electrodes with color coded wires for easy installation. Genesis models from 2010 using up to four front-mounted controls use this igniter kit.


$33.



Free Shipping USA!
weber ignition kit spirit genesis bbq
weber grill parts side burner

Weber models since 2010 have control knobs in the front of the barbecue as shown here in the Weber version of a barbecue kitchen island. This image and the one next to it here show four control knobs on the control panel because Weber also added an extra pipe burner changing the Genesis 310 model to a 330 model.

The Weber ignition has come a long way since the first Genesis piezo but every model still has a small chain with a steel wire extension to light the burners with paper, set on fire.




weber grill parts control panel

This is one of the newer Weber gas grills from 2011 that was designed to replace the custom outdoor kitchem. Originally incorporating the Summit model Weber these are also availabel with the Genesis 310 and 330 models as shown here.

Genesis model igniter electrodes clip to the stainless steel burner tubes which has removed the need for an extra ground wire that existed in all the previous Weber igniters because all the parts attached to either aluminum or plastic.




weber grill igniter module

grill repair is secure