Arkla and Embermatic Replacement Grill Burners.

1117261

Stainless Steel H burner with one single venturi tube. Whole burner 16 x 8 inches is controlled by a single valve. Single venturi tube is 7" although we use an adjustable which will slide larger and smaller as needed.

H burner includes Venturi tube supports and hardware for complete installation.

1217261

H burner 19.5 inches X 8 inches with single vertical 7 inch venturi connection to single control valve.

HBURN152

Replacement stainless steel H burner 16 X 8 with two venturi connections.

This selection is for the burner, only. The venturi tubes, gaskets, hardware are not included.

H1527122

Replacement stainless steel H burner w/double venturi tube connections. Arkla, Preway, Embermatic barbecues can be repaired with these H shaped burners slightly less than 16 X 8 inches. Venturi tube valve connections are 4 inches high on center and bend forward 6 3/8 inches to the control valves.

1527241

Replacement H burner includes adjustable venturi tube connections, hardware, gaskets and everything needed to install and use the grill. Burner is 16 x 8 inches and valve connections can be bent to form and extended longer or shorter.

Stainless Steel H shape burner includes adjustable stainless venturi tube valve connections, gaskets, hardware and installation supports.

H burner 16 x 8 inches.
Venturi tubes 11 inch to 18 inches.

Repair many Arkla, Preway, Embermatic BBQ grills with stainless steel H burner 15 7/8 X 8 inches. Double venturi tubes connect the controls coming 3 inches down from burner and forward 5 inches.

152732

Replacement stainless steel 16 X 8 inch H burner.

Burner includes double venturi tubes connect right/left burner to valves. Burner ships with hardware, gaskets, installation supports, everything needed for installation in much older original Arkla models.

1627241

162731

Replacement stainless steel H burner 19.5 X 8 inches with two adjustable venturi tubes. Venturi tubes adjust 5 to 7 inches vertically to connect burner onto control valves.

1627282

Replacement 19.5 X 8 inch stainless burner with double venturi tubes. Gas venturi tubes on center are sharply curved 3 inch high and under 5 inches towards and over valves.

Replace Oval burner 19 inches wide and 4 inches deep. Double venturi tubes 2.5 inches vertical and 8 inches horizontal to connect valves.

252HBurn

Heavy cast iron H shaped burner is 8 inches X 16 inches. Actually Fifteen and seven-eighths inches long.

This is only the burner with two holes for two venturi tubes connecting the burner to two control valves.

252731

Replacement cast iron H burner installs in Arkla, Preway, Embermatic, Charmglow and others.

Almost 16 inches wide and 8 inches deep burner has Two adjustable straight venturi tubes. Extend 5.5 to 7 inches long connecting to control valves.

2527122

Cast iron H burner includes two gas venturi tubes connecting burner to valve to fit many older original gas BBQ grills.

Same 16 X 8 inch cast burner. On center, venturi are Four inches vertical and six and three-eighths horizontal. Again, on center, two incheswide at venturi air-shutters.

Replacement cast iron H burner installs into Arkla, Preway, Charmglow, Embermatic, and other BBQ grills with two curved venturi tube connections to control valves. Burner is almost 16 inches wide and 8 inches deep.

Venturi tube connections just over 3 inches high and bend 5 inches extended forward, slightly over 2 inches wide.

Cast iron H shaped replacement burner for many Arkla models. Heavy corrugated venturi tube adjusts by extending and bending to connect the Arkla control valves.