This burner support shelf is designed to be universal. The size of the shelf, additional cross over boxes and several brackets that are flat and angled allow this item to be installed into hundreds of different barbecues to support the back of the grill burners. Installation holes and hardware has slotted openings to allow the brackets to be adjusted during installation and extra collector boxes can be placed around the burners or next to existing cross over boxes to make them longer depending on where the burners rest on the shelf.
Item | Description | Price | Illustration |
CBRR4 | Support bracket for Brinkmann barbecue grill models. This cross-over support installs in the back of the grill and mounts burners level with cross over ignitor tubes. Extra mounting brackets and extra collector boxes are included to make the braxket adjustable for many models. Overall width 22.5 inches and extra collector brakcets are 2 inches. |
$40.
Free Shipping USA!! |
![]() |
![]() |
Cross-Over Burner ShelfThe support barcket is designed to keep the grill burners level. Although vapor both propane and natural gas will gravitate to the lowest point. The burner must be level for an even flame pattern. This support shelf is much nicer than most because it also has cross over tubes. The shelves with cross over tubes make ignition faster because flames from one burner can jump across to the other burners. |
![]() |
Grills are designed with a single electrode (spark-plug) for each burner but as barbecues get used the electrodes get dirty and sparks take longer to light the gas coming from the burners. Gas will continue to collect insode the barbecue and even with only one of five electrodes sparking the cloud of gas will eventually grow to ignite. This can be very frightening and very dangerous. The cross over design makes ignition faster when the electrodes are not working efficiently so long as one burner will ignite. |
![]() |
Burner support shelves do not belong in every BBQ. Many models have a shelf for the burners to rest on built into the design of the firebox. Other gas grills have a shelf without cross-over tubes to help with the ignition. Cross over boxes allow the flames from one burner to cross over the the other burners when the igniters are not working. Two four inch boxes are attached and 2 other boxes can be installed in many places along the shelf. |
Item | Description | Price | Illustration |
CBRR4 | Support bracket for Brinkmann barbecue grill models. This cross-over support installs in the back of the grill and mounts burners level with cross over ignitor tubes. Extra mounting brackets and extra collector boxes are included to make the braxket adjustable for many models. Overall width 22.5 inches and extra collector brakcets are 2 inches. |
$40.
Free Shipping USA!! |
![]() |
This image is a close-up of a standard vaporizer shield (on top) and the burner support shelf (on right side and bottom) designed to show the thickness of the stainless steel. This bracket is manufactured to be universally adjustable but also very heavy and strong for a long life outdoors in your barbecue.
The burner support shelf comes with an L shaped installation bracket and a flat bracket. Both mounting brackets have elongengated bolt holes to allow the distance to be adjusted. The installation hardware allows the stainless support to be adjusted to become larger than its 22.5 inches and to be bolted in many different ways within many different BBQ's.
The burner support shelf is designed to be universal and adjustable for many applications. There are collector boxes attached to the shelf and additional collector boxes that can be added in different places along the shelf depending on where the burners will install.
The adjustable cross over boxes are two inches long. The static boxes are four inches long. The shelf can be used with or without the brackets and the additional cross-over boxes. The extra parts allow us to use this bracket with many different burners.