CharGriller Gas BBQ Grill Replacement Parts

Stainless steel straight pipe burner is slightly over twenty inches long and has an adjustable carburetor shutter for the gas orifice and a flat perpendicular ignitor bracket.

Stainless steel replacement barbecue grill burner for Chargriller models with fifteen inch pipe burner. Back plate has a corner bend for back support installation and the burner comes with the electrode bracket for ignition.

Universal 4 Spark gas bbq grill ignition module. AAA battery screws under button and nut hold module to control panel with 4 attachments for using up to 4 ignitor electrodes together. Less than 4 can also be used by grounding unused electrode attachments.

Replacement ignitior electrode installs at and sparks at burner.

20” ignition electrode wire with female spade connectors. Connect igniter electrodes and modules for any ignition system.

47” ignition electrode wire with female spade and square plastic connectors used with battery powered spark generators to connect igniter electrodes and module.

Usually a rotisserie connection.

push-button piezo plunger with external grounding prong and mounting nut. Grounding prong may also be used to conduct charge to a secondary electrode in grills with a side burner.

This may be the most used igniter module in the world of grilling! Hundreds of thousands of Weber models have this ignition and dozens of other models all used this same piezo with the mounting nut to hold the igniter to the control panel.

push-button piezo plunger with three electrode plugs. This igniter module was very popular in the original Ducane barbecues where two electrodes were controlled with this one piezo button and the third outlet was used as a ground.

Universal battery powered ignitor for Many BBQ Grills with AA battery ignition. Battery is under the button so the ignition module is attached to the front control panel.

Module has 4 outlets to connect up to 4 electrodes.

Replacement module for any gas barbecue grill ignition system. All-In-One battery powered AA ignitor module has 2 outlets and can be connected to any one or two electrodes for any barbecue ignition system.

Replacement ignitor spark generator with 6 electrode connection brackets.This ignition module can be made to work with any barbeque that has a hole in the control panel or by placing a hole in the control panel. A nut under the button holds the module box to the control panel and the AA battery is under the button which unscrews to replace the battery.