Charmglow Gas Barbeque Grill Repair Parts

Gas BBQ grill control valve replacement for Charmglow barbecue grill repair. This control valve is a straight valve with a nut on the end for a compression fitting that runs to the orifice and into the barbeque grill burner. 1/4 inch compression fitting. 8 mm stem. D=9.

Replacement BBQ grill mounting post. 3 Inch diameter. 24 Inch tall post replacement. Barbecue parts replacement used in Charmglow, Brinkmann, Arkla, Falcon and other very old, original barbecue grill models mounted on posts.

3 Inch diameter. 9 Inch tall post. Barbecue grill mounting post with holes for control valves, shut-off valve and control knob installation. BBQ mounted with posts include Charmglow, Arkla, Amberlight, Falcon and others.

This 9 inch post has been discontinued. Current inventory is the very last of these that can be sold!

universal ignitor bracket with collector box, electrode, insulated wire, and female connector compatible with most piezos. Fits all H burners, both cast iron and stainless steel. Mounts to burner using venturi screws. Slot allows adjustment of electrode position.

electrode details

universal control knob. Universal knob. Selectable D position (refers to the shape of the control valve post), socket diameter (6mm or 8mm), and shaft length (flush, 0.25”, or 1.625”. Shafts can also be trimmed to desired length). Includes six inserts (shafts) and set screw. Fits any grill with inside bezel dia. greater than 2.1875”.

Knob Details

Charmglow -universal - control knob with no shaft. Counter clockwise bezel.

Replacement control valve for many Charmglow gas barbecues a very long time ago. D = 12 -- this means with the OFF position straight up in a 12 o'clock position the D shape of the valve stem is facing 12 o'clock. This means the flat of the D is on the bottom and the round part of the D is pointing at 12.

Two Inch diameter knob. Bottom extends 5/8 inch from bottom edge.

This control knob is almost exactly the same as the control knob above. The diameter and stem extension and knob markings are all identical to one another. The difference between these control knobs is that the valve stem sliding into this knob witll have the D shape pointing to 6 o'clock when OFF is at 12 o'clock on the knob face.

The shiny silver ring on this knob is Not Attached but is tape so You Will Attach this by sticking the ring to the knob. This ensures the OFF and HIGH, LOW, etc is in the proper position regardless of which control valve you have. The control knob has a Two Inch diameter across. The base that connects to the valve stem sticks out 5/8 of an inch.

Replacement ceramic electrode ignitor kit to repair Brinkmann, Charmglow, Grill King and other barbecue igniters. Ignition electrode cross over box is 5.25 inches wide, includes hardware to attach inside BBQ grill.

LP hose with QCC-I type one regulator fits all grills 3/8 flared female fitting for grill manifold and 24 inch hose.

36" LP Hose Regulator. Fitting is 3/8 inch flared female onthe hose and a QCC hand wheel on the regulator made to fit standard LP tank valves.

Replacement regulator for Natural Gas Grill with 1/2 inch female attachments. Buy this regulator for NG bbq grills and if you are converting a barbeque from LP (liquid propane) to natural gas.
LP regulator allows gas at approx 11 inches of water column and natural gas regulators regulate gas at 2 inches water column.

In-Line Liquid Propane Appliance Regulator.

When using a large permanent propane tank the gas line will connect to the barbecue with this low-pressure appliance regulator.

Aluminum Block for natural gas regulator holds valve and burner in post. Cast aluminum regulator block threaded top and bottom and at front cap to attach to post and hold the regulator and valve to the post.

This aluminum block is an integral part of many old barbecue grills.
Thealuminum block is threaded with a bolt in front and a second opening that can be tapped and threaded as necessary. This allows the gas line to be attaced to the inside front of the mounting post for the BBQ grill. This was the control valves mounted in the grill post are attached to the gas line coming up through the post and are held solid within the mounting post so the controls are solid and comfortable.

Replacement chrome steel warming rack fits JAK and TNK original model Charmglow gas grills.

Replacement chrome steel warming rack fits Charmglow models including the old AMK original model grill.

Replacement chrome steel warming rack Charmglow model HEJ-1 and the Charmglow HEJ-1T.

Stainless replacement cross over attachment designed to facilitate burner ignition between barbecue grill burners.
These cross-over burners are found in Charmglow, Brinkmann and other barbecue models.

Over all width is 7 5/8 inches. Top crossover box width is 7 5/8 inches and total height is 2 3/8 inches.

Stainless replacement cross over attachment designed to facilitate burner ignition between barbecue grill burners in Charmglow, Brinkmann and other barbecue models.

Over all width is 8.25 inches and total height is 2 3/8 inches.

Stainless replacement cross over attachment designed to facilitate burner ignition between barbecue grill burners in Charmglow, Brinkmann and other barbecue models.

Over all width is 11 7/8 inches and total height is 2 3/8 inches.

Stainless replacement cross over attachment designed to facilitate burner ignition between barbecue grill burners in Charmglow, Brinkmann and other barbecue models.

Over all width is 10.25 inches and total height is 2.25 inches.

Stainless replacement cross over attachment designed to facilitate burner ignition between barbecue grill burners in Charmglow, Brinkmann and other barbecue models.

Over all width is 7 inches and total height is 2 3/8 inches.

Stainless replacement cross over attachment designed to facilitate burner ignition between barbecue grill burners in Charmglow, Brinkmann and other barbecue models.

Over all width is 7 5/8 inches and total height is 2 3/8 inches.