FireMagic Gas BBQ Grill Replacement Burners
FireMagic gas bbq grills byt R.H. Peterson have long been considered one of the best backyard barbeque products in the world. Original gas grill burners were cast brass, cast stainless steel or like the replacements below cast iron with a sealed coating. FireMagic gas grills are all american made and are manufactured with the best outdoor materials for long life, durability and great cooking. New Firemagic barbecue grills today have become very fancy with digital thermometers, solar panels, lights and windows.
| FireMagic Grill Grates | FireMagic Heat Shields | Other Firemagic Parts |
| Item | Description | Price | Illustration |
| 83201 | Cast iron burner firemagic replaces the 3041 cast stainless steel burner by Firemagic. This burner is 19 inches long and it installs into the pre-2008 Regal Magnum, Monarch, Regal 2, Custom 2 and Firemagic Deluxe gas grill models. |
$43.
Free Shipping USA!! |
 |
| 83211 | Replacement burner for FireMagic pre-2008 Regal I and the Custom I gas bbq grills by R.H. Peterson. |
$43. Free Shipping USA!! |
 |
| 3.424.2 | Cast stainless steel replacement R.H.Peterson gas bbq grill burners for Firemagc barbecues. This item number and price includes two (2) cast stainless steel burners that are 14 7/8" full length like the cast iron 23211 above. |
$190. Free Shipping USA!! |
|
| 3.414.2 | Nineteen inch long cast stainless burner for pre- 2008 Regal 2, Custom 2, Deluxe, Monarch and Regal Magnum barbecue models. This item ships with 2 burners. |
$220. Free Shipping USA!! |
|
| 03047 | Infrared burner replacement for FireMagic pre- 2008 Regal I and pre- 2008 Custom barbecue models. |
$345. Free Shipping USA!! |
|
| 03046 | Infrared burner replacement for FireMagic models with the larger burners: pre- 2008 Deluxe, Custom II, Regal II, Elite models and the Monarch gas grills. |
$359. Free Shipping USA!! |
|
Firemagic, manufactured by R. H. Peterson Corporation is also the manufacturer of Real Fyre gas logs and American Outdoor Grills. The compnay also has do-it-yourself outdoor kitchen islands for the grill and access ory sizes. The company makes dozens of built in gas grill accessories ofr customizing grill islands, fire pits and fireplaces.
Cast stainless steel burners made by RHP for Firemagic gas grills are the heaviest and strongest gas barbecue grill burners made by any high-end barbecue fabricator. In fact the firemagic users manual tells customers it is safe to use characoal and wood in the barbeque because burners are so heavy and dense that even the mess of these fuels can cause little harm.
FireMagic Gas BBQ Grill Replacement Instructions
FireMagic Post-2001 BBQ Grills have stainless steel frame bodies.
FireMagic gas bbq grill burner repair for screw or peg type assemblies.
For burner clip assemblies, using a flat blade screwdriver, pry the burner retaining clip from the rear wall of the barbeque frame. Remove the burner by pulling the burner to the front of the barbecue, lift the far end out of the notch and pull the burner away from the manifold taking care not to lose the air shutter and spring which may become detached when the burner is removed.
To replace the burner or to install a new Firemagic burner follow the instructions above in reverse. Finally replace the burner clip over the burner and notch into the two securing holes in the rear of the barbeque grill frame.
FireMagic Burner removal and replacement to repair Pre-2001 porcelain frame bbq grills
Depending on the type and model of Firemagic barbecue, each burner is held in position by either a peg or a stainless steel screw or a stainless steel burner clip.
If a screw is used the hole in the tab at the end of the burner may be slightly larger than the screw. A stainless nut is used to secure the screw to the frame and a second nut to secure the burner if a screw is used.
For screw/peg assemblies. Simply use an adjustable wrench or appropriate sized socket to remove the nuts. Remove the old burner by Lifting the burner tail off the screw or peg. Pull the burner away from the manifold, taking care not to lose the air shutter and spring which may become detached when the burner is removed.
To replace the Firemagic burner or to install a new Firemagic burner follow the above steps in reverse. Make sure the air shutter and the spring are in the proper order and replace the nuts and tighten.
