Stainless Hose Guard Protection Fits Over Rubber Gas Line
The stainless steel hose guard is designed to fit over the standard rubber hose and regulator on any barbecue grill. The protective sleeve is coiled like a spring so some adjustment is possible. Having the coiled hgas line guard over your barbecue hose protects the rubber hose from heat id it gets too close to the barbecue for box. The guard will also keep outdoor critters from chewing on the gas line which can be very dangerous. In an outdoor kitchen on an underground gas line the gas hose often has to travel through a wall where froction can slowly erode holes in the gas line but the hose guard keeps the rubber hose insulated within the stainless steel coil so the rubber gas hose is always protected. Guard slides on and off for easy replacement if the grill or hose ever needs to be repaired or replaced.
| Gas Lines and Fittings | BBQ Fittings | Universal Grill Parts |
| Item | Description | Price | Illustration |
| 82425 | No Rust stainless steel hose guard slides over gas line to protect hose and regulator from hot BBQ, rodents that may chew the gas line, rough wall openings, etc. Relaxed product is 24 inches long and 7/8 inch inner diameter. |
$20. Free Shipping USA! |
 |
|
Hose GuardUse this coiled stainless steel gas hose guard to protect the barbecue grill gas line from heat, critters or any damage that can cause leaks and/or uncontrolled fires. |
|
This stainless steel guard is designed to fit onto the gas line of any barbecue grill. Usually this means the hose and regulator. A damaged rubber hose can cause a dangerous leak or can trigger LP tank safety checks which stops gas flow. Rubber hoses can also be chewed up by animals outdoors that are attracted to the barbecue area by the smell of dried up grease. In an outdoor kitchen the gas hose will often be run through a wall which can be dangerous. The gas line should be corrugated steel or braided stainless. If a rubber hose must be used the stainless hose guard is a must-have. Protect the rubber gas line from touching anything sharp or anything that can cause friction that will eventually damage the gas hose. |
| Item | Description | Price | Illustration |
| 82425 | No Rust stainless steel hose guard slides over gas line to protect hose and regulator from hot BBQ, rodents that may chew the gas line, rough wall openings, etc. Hose Guard is coiled like a spring so it can be adjusted and can be used with several guards together. In its relaxed state the guard is 24 inches long and almost an inch across the inner diameter. |
$20. Free Shipping USA! |
|
| DCS Parts | Charbroil Parts | Arkla Parts | Weber Parts | GrillMaster Parts |
This T adapter is three-eighths male flare. 3/8 inch inside diameter is a standard inner diameter opening in most LP gas lines.
For natural gas the standard is usually a half-inch inside diameter. Natural gas has a larger mass than liquid propane so the inner diameter of NG hoses is usually 1/2 inch. Gas needs more room to move the same amount of gas because propane is smaller mass.
Most gas hoses designed for residential use will have flared ends so normal home owners can easily use the gas fittings with out any special tools or materials. Flared adaptors are easy to use because they create their own seal and will not leak as long they connection is tight.