OCI Gas BBQ Grill Repair Parts for Outdoor Concepts Gas BBQ Grills.

Replacement for original Stainless steel OCI radiant tray and radiant rods. The OCI E36 and E48 rod trays above stainless U burners causes Perfect convectional and conductive heat.

Two Sizes Available. OCI Elite rod trays are available in Two Sizes!

Stainless Steel Radiant Rods for OCI Elite gas barbecue grill models. Evolved beyond briquettes or lava rocks OCI grill models have radiant assemblies with stainless steel tubing to conduct heat to the grilling surface. One selection is for One radiant rod and OCI radiant assembly trays hold seventeen stainless tubes.

All stainless steel concave cooking grate for the infrared section in the OCI Elite 36 and 48 inch model BBQ grill as shown to the right. The concave design of the grilling grid holds sauces and dripping from food in the groove to vaporize back into the circulating convctional heat circulating inside the closed lid.

The new replacement grate is One Solid Stainless V Channel Cooking Grate. Much better design and costs less than what the original used to cost us!!

Heavy stainless steel wire cooking grid for the OCI 36 inch gas grill Elite model. This is the cooking grate that is above the tubular rod radiant assembly and U shaped burner.

Cooking Grate Details

Heavy stainless steel wire cooking grid for the OCI 48 inch gas grill Elite model. This is the cooking grate that is above the tubular rod radiant assembly and U shaped burner.

Cooking Grate Details

Stainless U Shaped Burner - Perfect Installation in OCI Elite 36/48 inch model burner replacement. Burners ship with additional front and back supports and other parts for easy installation and Perfect performance!

OCI is gone but We've been replacing OCI U burners for years with no trouble! Review both installations and pricing from the page linked below:

Center fed U burner for OCI 30 models has the lower center feed tube so the U of the actual burner installs above the feed tube which angles down to fiot onto the control valve orifice as shown.

This burner also ships with back and front supports and hardware for easy installation.

Replacement U shaped burner for the OCI model barbecue grill 26 inches wide.

When OCI burners are unavailable we use another Stainless Steel burner and mounting bracket that installs the same.

Replacement vaporizer radiant shield for OCI 26 inch barbecue grills. OCI 26 model BBQ has 2 burners and 2 heat shield vaporizer shields below the cooking grates.

Originals unavailable from OCI so we have these custom made for OCI E26 Model barbecues.

OCI replacement control valve.

Control valve attaches to manifold inside control panel. Knob mounts to front "D" shaped stem and gas orifice threads to the front. The perpendicular threading is where the valve attaches to the manifold to pull gas. Gas comes in through the bottom and out the front of the valve. Inside a small ball-valve adjusts the flow of gas.
Valve Detail

OCI Rotisserie Safety valve.

Rotisserie safety valve button for OCI barbecue grill models. The safety valve has flared-thread- adaptors for gas in and gas out with the thermocouple threaded into the back of the safety button. The safety valve button interupts gas flow unless the button depresseed and unless heat from the thermocouple generates millivoltage to compress the internal solenoid.
Valve Detail

Thermocouple replacement for OCI models withthe rotisserie safety valve shown above. This thermocouple is seventy two inches long for use with any of the OCI models.

OCI replacement hood style orifice with starter hole and 1/8-27 pipe thread.
Generally, the only reason to change an orifice is because the gas type is changing so orifices must be purchased with appropriate regulator - otherwise orifices arrive blank. Although all the OCI orifices are the same each burner requires a different BTU setting.

116005.143704

OCI replacement electrode comes with electrode wire, collector box bracket with cross over igniter tube. In the Elite 36 and 48 models by Outdoor Concepts each electrode is designed to light the burner on the left side and the right side of the mounting bracket.

Now that OCI is not manufacturing, these crossover brackets are extinct and we install other replacement igniter electrodes:

Replacement electrode and collecor box cross over tube for OCI 26 inch grill models. The ignitor bracket cross over tube for the 26 inch barbecue is 5 inches wide.

Now that OCI is not manufacturing, these crossover brackets are extinct and we install other replacement igniter electrodes:

Replacement electrode and collecor box cross over tube for OCI 30 inch grill models. The ignitor bracket cross over tube for the 30 inch barbecue is 4.5 inches wide which allows the electrode to ignite gas from burners on the right and the left side of the ignitor.

Now that OCI is not manufacturing, these crossover brackets are extinct and we install other replacement igniter electrodes:

OCI electrode replacement has 36 inch wire attached with plug for attaching to the module. This electrde is the igniter that is installed onto the cross over bracket in the Elite series gas barbecue grills by OCI.

This is an alternative electrode we use to attach to the OCI cross over electrode. The electrode has a bracket with a nut and bolt that fits the OCI bracket. The tip will slide right into the cross over tube and will need to be clipped to size. We do not clip these to size before shipping because there have been some inconsistencies in the OCI brackets. Line it up on your bracket, mark it with a marker and then clip the tip to fit into the cross over tube. 47 inches.

Ignition Details

Electrode and collector box in threaded sleeve can be retro-fitted to replace the electrode and collector box in OCI E36 and E48 grill models.

Double prong ignitor electrode for Vintage grill infrared rotisserie burner. Tip to tip length is just over 4.25 inches.

Electrode with wide bracket and two installation holes for mounting. We also use this electrode to replace the electrode on many DCS rotisserie ignitor assemblys.

Electrode Instructions, Details and Specifications

Replacement ceramic electrode ignitor. Total length 3.5 Inches and 2.25 Inches from mounting bracket to bend in tip.

Igniter Electrode 106730

Ignitor switch. The ignition momentary button has small plastic tension flaps on the sides so it clicks into place in the hole in the control panel. Two metal spade plugs on the back of the button are wired to the module si the electrodes spark as long as the momentary button is pressed down.

Momentary switch is also know as the button that makes the igniter spark. The pyramid-shaped rubber button is a momentary switch and allows the module and send electrical charge to spark at the electrodes. This igniter button was designed for the Alfresco 9 volt assembly but is a great tool to replace the ignition button on dozems of barbecue models.

Ignition Details

Replacement ignitor module for OCI gas BBQ Grills. Most OCI Elite models use this 9-volt battery powered spark generator. Nine volt module has 6 outlets designed to control up to 6 Ignition electrodes.

Ignition Details

Outdoor Concepts, OCI ignition module with 8 eight outlets for eight electrodes to plug into. This is good for the 48 inch models with side burners, rotisserie, smoker and grill burners that use 8 electrode igniters. Button installed into control panel wires to this models. Nine volt battery (not included).

Ignition Details

OCI replacement 4 spark module uses 9 volt battery and switch. There is a separate button mounted in the control panel. Use this module in the 36 inch, 30 inch and 26 inch OCI gas grill models that need a 2 spark or 4 spark igniter module.

Ignition Details

Replacement electric all-in-one spark generater module. This type of module is the spark generator, the button, the battery holder and mounting bracket all in one product. The nut under the button holds the spark generator to the front control panel so only the button sticks through the barbecue grills panel. The button unscrews to be able to remove and replace the AAA battery without removing the entire module.

Replacement module for any gas barbecue grill ignition system. All-In-One battery powered AAA ignitor module can be connected to any electrode for any barbecue ignition system.

Metal control knob of mirror-polished stainless for OCI barbecues. Usually only the marine models still come with the heavy metal knobs and the others are all plastic. These heavy metal knobs are the New OCI Elite Design but they fit all the older barbecue grill models.

Replacement control knob designed to look like a DCS Satin Finish knob but a third of the cost. Selectable D position inserts come with the knob to adjust the socket diameter and shaft length. Includes six inserts (shafts) and set screw. Control knob diameter is just over Two Inches.

Knob Details

table top regulator with orifice is made for portable grills. Regulators includes on/off, high/low valve and dispences propane directly into the gas grill burner.
This does snot fit every portable barbeque but may need to be manipulated to fit a lot of models. Check your model and be sure.

Replacement regulator for Natural Gas Grill with 1/2 inch female pipe threads. Use with NG bbq grills and when converting a barbeque from LP (liquid propane) to natural gas.

Replacement regulator for Liquid Propane Grill with half inch female pipe thread. Use regulator for LP (liquid propane) in-line use with a permanent gas tank and converting natural gas models to permanent LP connection.

Two Stage Propane Regulator with gas hose. Gas hose connection is 3/8 flared female. Two stage regulators are usually found on larger sized infrared grills and should be used on any low pressure LP appliance pulling 65,000 BTU or more from a portable LP tank.

Door Hinge. Adjustable door hinge used in many OCI double and single access doors built into outdoor kitchen islands.

Replace OCI access door and drawer handle with solid stainless handles. OCI started with stanless steel and then switched to chome-plated plastic which flakes and peels so we buy the original solid stainless handles only.

Full Picture With Dimensions Below.

Additional OCI replacement parts -- gas burners, cooking grates, rod trays, etc. are available on a special order basis only. Contact Us at 954-2-GRILL-2 for information regarding replacement parts for OCI barbeque grill repairs.

DCS Grill Repair Parts -- Some OCI replacement parts are interchangable with some DCS models because of the obvious relationship between the two barbeque grill manufacturers. Repair parts like control knobs, orifices, electrodes and modules can be used on both brands of gas grill.

OCI Outdoor Concepts Barbecue Grill Models:

OCI User Manual and Built-In Specifications

OCI use and care manual for all OCI grills contains proper usage and safety practices. LP and NG hook up information and BTU data as well as ignition, adjustments and warranty contact. This Outdoor Concepts Users Manual demonstrates how to use the grill, infrared sear zone, rotiserrie, smoker and even contains grilling tips and recipes. Constructions details for built in BBQ grill heads and replacement parts are also included.

This is the color sales catalog for all OCI products. Color images, detailed information and built in specs for grills, built in access doors and all built in accessories for Outdoor kitchen grill island construction.