Phoenix Gas BBQ Grill Replacement Burners.
Replacement burners designed exclusively for the old Phoenix barbecues with double venturi burners that have a control panel on the front of the BBQ grill. The difference between these burners is that one has small simple supports like small feet on the bottom of the barbecue fire box ans the other has much longer threaded support leg for attaching the burner to the fire box during installation. Either burner will usually work interchangably because there are small holes in the bottom fire box of the grill.
| Phoenix Parts | Phoenix Grates | Heat Shields and Briquette Grids | Phoenix Repair Parts |
| Item | Description | Price | Illustration |
| 11602-79062 | stainless steel replacement burner for phoenix barbecue grill repairs of models SWRG1998-P and WRG1998-P. |
$47.
Free Shipping USA!! |
|
| 19012-79062 | Replacement stainless steel oval burner and venturi tubes for Phoenix grill repairs of models PG2001-P, PG2001-PBS, SPG2001-P. |
$46.
Free Shipping USA!! |
|
| 19012 | Replacement stainless steel oval burner only for Phoenix grill repairs of models PG2001-P, PG2001-PBS, SPG2001-P. |
$33.
Free Shipping USA!! |
|
Oval Burner
Oval Burners and H shaped burners used to be extraordinarily popular among all gas barbecue manufacturers because the venturi tubes could be created to fit between the burner and the control valves very easily.
Grill Parts Dimensions
Many Phoenix barbecues were created to be installed on a post like this older Arkla BBQ. These older models were molded with cast aluminum that would last forever even if it did not stay pretty for more than a decade. The burner venturi tubes extended below the burners through the walls of the grill into the post or into the control panel which was a much easier and safer design that is rarely in use today.
Because the post mounted barbecues of old were not very effective at hiding the gas lines or propane tanks a lot of the barbecue stores like us would build the grill-head into an outdoor grill island. This allowed the base of the barbecue to be completely hidden. Built in grills were not effective with the single venturi models because the control valves mounted in the grill post but the double venturi tube models had a control panel so we were able to build those grills into an enclosure.